Hinge Series Master Specifications Table
LEECO Technologies Corporation
|
Product Series |
Model Name |
Torque Range |
Outer Diameter |
Cycle Life (Cycles) |
| Torque Insert | TIP14 | 3.2 - 14.4 Nm | 14 mm | > 25,000 |
| Torque Insert | TIP10 | 0.8 - 6.0 Nm | 10 mm | > 25,000 |
| Torque Insert | TIM10 / TIM10A | 0.4 - 2.4 Nm | 10 mm | > 50,000 |
| Constant Torque | CD20A / CD20B | 1.88 - 6.25 Nm | 32.1 mm | > 10,000 |
| (Vertical Configuration) | ||||
| Integrated Torque | QM15 | 1.84 - 7.32 Nm | 15 mm | > 25,000 |
| Integrated Torque | QM12 / A / B | 0.0 - 4.92 Nm | 12.7 mm | > 25,000 |
| Integrated Torque | QM10 / A / B / C | 0.0 - 4.08 Nm | 10 mm | > 25,000 |
| Friction Hinge | QA7 | 0.88 - 3.24 Nm | 7 mm | > 25,000 |
| Friction Hinge | BT7A / BT7B | 0.32 - 1.08 Nm | 7 mm | > 25,000 |
| Friction Hinge | TS10 (Tilt & Swivel) | 0.75 - 2.5 Nm | 10 mm | > 25,000 |
| Integrated Friction | CT10A / B / C | 0.72 - 4.08 Nm | 10 mm | > 25,000 |
| Integrated Friction | QM7A / B / C / D | 0.16 - 1.32 Nm | 7 mm | > 25,000 |
| Self-Closing Friction | LL7A / LL7B | 0.32 - 1.08 Nm | 7 mm | > 25,000 |
| One Way Friction | OW10 | 0.5 - 2.0 Nm | 10 mm | > 50,000 |
| Stainless Steel | QM10S | 0.0 - 6.25 Nm | 10 mm | > 25,000 |
| Stainless Steel | BH10S | 0.38 - 2.50 Nm | 10 mm | > 25,000 |
| Barrel Hinge | BH12 | 2.25 - 5.63 Nm | 12 mm | > 25,000 |
| Barrel Hinge | BH10 | 0.75 - 3.75 Nm | 10 mm | > 25,000 |
| Barrel Hinge | BH8 | 0.38 - 1.00 Nm | 8 mm | > 10,000 |
| Barrel Hinge | BH7 | 0.45 - 0.75 Nm | 7 mm | > 10,000 |
| Barrel Hinge | BH6 | 0.38 - 0.63 Nm | 6 mm | > 10,000 |
| Barrel Hinge | BH5 / BH5A | 0.4 - 0.5 Nm | 5 mm | > 10,000 |
| Barrel Hinge | BH4 / BH4A | 0.085 - 0.176 Nm | 4 mm | > 10,000 |
| Barrel Hinge | BH3 / BH3A | 0.033 - 0.068 Nm | 3 mm | > 10,000 |
| Barrel Hinge | BH2A / BH2B | 0.013 - 0.038 Nm | 2.5 mm | > 10,000 |